V-belt Movendis P-C56
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C56 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C56 and any equivalents.
The Movendis P-C56 is a classical wrapped V-belt in the C profile, with a length of 1422 mm. It measures 22 mm across the top, 14 mm in height and has a 40° angle. This belt is used in industrial drives where a standard classical cross-section is required.
Before fitting a new belt, inspect the sheaves and the rest of the drive. Check the groove flanks for wear, scoring or embedded debris, and confirm the sheave grooves match the C profile. Look at the shaft bearings and the alignment of the pulleys; a belt that runs hot or wears quickly often points to a sheave or alignment problem rather than the belt itself. Correcting these issues before installation helps the new belt seat and run as intended.
The P-C56 is a wrapped classical V-belt with a 40° angle, 22 mm top width and 14 mm height. Its 1422 mm length is the datum to match when replacing an existing belt. If you are unsure of the profile or length, read the marking on the back of the old belt and send that information with your request.
To request a quote, send the part number P-C56 or the full marking from the old belt. If you have the profile and length, include those as well. Our team can confirm the belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- C
- Length
- 1422mm
Frequently asked questions
- What are the dimensions of the Movendis P-C56?
- The P-C56 is a C profile classical V-belt with a length of 1422 mm, a top width of 22 mm, a height of 14 mm and a 40° angle.
- What should I check before installing this belt?
- Inspect the sheave grooves for wear or debris, verify the groove profile matches the C section, and check pulley alignment and shaft bearings. Addressing these points before fitting the belt helps avoid premature wear.
- How do I request a quote for the P-C56?
- Send the part number P-C56 by WhatsApp or email. If you have the old belt, include the marking on its back, along with the profile and length, so we can confirm the correct belt or suggest an equivalent.