V-belt Movendis P-C303
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C303 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C303 and any equivalents.
The Movendis P-C303 is a classical wrapped V-belt in a C profile, 7700 mm long, 22 mm top width, 14 mm height, 40-degree angle. To match it, read the marking on the back of the belt you are replacing and compare profile and length. If the marking is worn or missing, measure the belt and confirm the drive before ordering.
The C profile sets the cross-section: 22 mm top width and 14 mm height. The 40-degree angle is the included angle of the V. The length is 7700 mm. These four values identify the belt; a different profile or length will not fit the same drive.
When the old belt is still on the drive, note the part number printed on the back. If it matches P-C303, order the same belt. If the number is unreadable, measure the outside length and the top width, and check the sheave groove. Send those numbers and a photo of the marking to MR for confirmation.
If the drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect sheaves for wear, alignment and debris before installing the new belt. Keep the old belt until the replacement is running correctly.
Dimensions
- Section
- C
- Length
- 7700mm
Frequently asked questions
- How do I confirm the P-C303 is the right belt?
- Read the marking on the back of the belt being replaced. If it shows a C profile and 7700 mm length, the P-C303 matches. If the marking is gone, measure the top width and outside length and send those values to MR.
- What are the dimensions of this belt?
- C profile, 7700 mm length, 22 mm top width, 14 mm height, 40-degree angle.
- Can I replace just one belt on a multi-belt drive?
- Replace the full set. Belts on the same drive wear together, and mixing a new belt with used ones can cause uneven load sharing.