V-belt Movendis P-C300
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C300 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C300 and any equivalents.
The Movendis P-C300 is a classical wrapped V-belt in a C profile, 7620 mm long. It has a 22 mm top width, 14 mm height and a 40-degree angle. The marking on the back of the belt is the fastest way to confirm what you are replacing.
When you read the old belt, look for the part number on the back. The P-C300 marking identifies this Movendis belt and its C profile. The profile sets the cross-section: 22 mm across the top, 14 mm high, with a 40-degree angle. The length is 7620 mm. If the old belt is worn or the marking is hard to read, measure the outside length and compare it to 7620 mm.
This classical V-belt suits drives that take a C profile belt. Check the sheave grooves for wear before you fit a new belt. A belt that sits too low in a worn groove can slip or run hot. Also check pulley alignment and belt tension, since these affect how long the belt lasts.
To request a quote, send the part number P-C300 and the quantity. If you are not sure the belt matches, send the marking from the old belt and the drive details. We carry the Movendis P-C300 classical V-belt and can confirm the C profile and 7620 mm length against your application.
Dimensions
- Section
- C
- Length
- 7620mm
Frequently asked questions
- What does the marking on the old belt tell me?
- The marking on the back of the belt identifies the part number. For this belt, look for P-C300. That tells you it is a Movendis classical V-belt in a C profile, 7620 mm long.
- How do I confirm the length if the marking is gone?
- Measure the old belt and compare it to the 7620 mm length listed for the P-C300. Also check the cross-section: 22 mm top width and 14 mm height. If it matches, the P-C300 is the same size.
- What should I send for a quote?
- Send the part number P-C300 and the quantity you need. If you are replacing a belt with a different marking, send that marking and the drive details so we can confirm the right belt.