V-belt Movendis P-C126

MOVENDIS P-C126 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C126 and any equivalents.

The Movendis P-C126 is a classical wrapped V-belt in the C profile, with a 3200 mm length, 22 mm top width, 14 mm height and 40 degree angle. Classical wrapped V-belts are used on drives where a standard cross-section fits the pulley groove, such as fans, pumps, compressors and other general industrial equipment. Confirm fit against the old belt marking and the drive pulley dimensions before ordering.

To confirm the P-C126 fits, check the old belt for the C profile and the 3200 mm length. Measure the top width at 22 mm and the height at 14 mm, and verify the pulley groove is cut for a 40 degree angle. The wrapped construction suits drives that run at moderate speeds and need a belt that grips the pulley sides.

If the marking on the back of the old belt is worn or missing, send a photo of the belt and the drive nameplate. Include the pulley diameters and the center distance so we can help you match the profile and length. The P-C126 is one size in the Movendis classical wrapped line, and we carry it for maintenance and replacement work.

When replacing a classical V-belt, inspect the pulleys for wear, alignment and groove condition. A worn groove can make a new belt sit too deep and slip. If the drive uses multiple belts, replace them as a set so the load stays even across all belts.