V-belt Movendis P-C125.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C125.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C125.5 and any equivalents.
The Movendis P-C125.5 is a classical V-belt in the C profile. It measures 3190 mm in length, with a top width of 22 mm, a height of 14 mm and a 40 degree angle. Use the marking on the belt being replaced to confirm profile and length before ordering.
To match this belt, read the marking on the back of the belt you are replacing. Confirm the profile is C and the length is 3190 mm. Check the top width of 22 mm, the height of 14 mm and the 40 degree angle against the old belt. If the marking is worn or unreadable, measure the outside length and the cross section, then send those values for confirmation.
The P-C125.5 is a classical wrapped V-belt from the Movendis line. It is built for drives that use C profile classical V-belts. When you replace a belt, inspect the sheaves for wear, alignment and debris. On drives with multiple belts, replace the full set so the load stays even across all belts.
Dimensions
- Section
- C
- Length
- 3190mm
Frequently asked questions
- How do I confirm the P-C125.5 is the right belt?
- Check the marking on the old belt. The profile should be C and the length 3190 mm. The top width is 22 mm, the height is 14 mm and the angle is 40 degrees. If the marking is not clear, measure the old belt and send the values.
- What should I send to request a quote?
- Send the part number P-C125.5, or the profile and length from the old belt. If you have the old belt, include a photo of the back marking. Our team replies by WhatsApp or email and can help confirm the right belt.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replace the full set. Mixing a new belt with worn belts can cause uneven loading. Inspect the sheaves for wear and alignment at the same time.