V-belt Movendis P-C108
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C108 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C108 and any equivalents.
The Movendis P-C108 is a classical wrapped V-belt in a C profile, 2743 mm long, with a 22 mm top width, 14 mm height and 40 degree angle. Before you fit it, inspect the drive and sheaves so the new belt seats and wears as intended. We carry this belt and quote by part number.
Start with the sheave grooves. Look for wear, corrosion, nicks, or polished sidewalls that let a new belt sit too deep. Check that the sheaves are aligned and that the grooves match the C profile: 22 mm top width, 14 mm height, 40 degree angle. A worn or misaligned groove will shorten belt life no matter how good the belt is.
Next, check the rest of the drive. Confirm the shafts turn freely, look for worn bearings, and make sure the belt tensioning arrangement moves properly. If the drive uses multiple belts, replace them as a set so the load stays even. The P-C108 is a classical wrapped V-belt, 2743 mm long, and it should run in sheaves that are clean and true.
When you request a quote, send the part number P-C108 and the quantity you need. If you are matching an old belt, read the marking on the back and share it, along with the profile and length, so we can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2743mm
Frequently asked questions
- What are the dimensions of the Movendis P-C108?
- It is a C profile classical wrapped V-belt, 2743 mm long, with a 22 mm top width, 14 mm height and 40 degree angle.
- Why check the sheaves before fitting this belt?
- Worn, misaligned or damaged sheave grooves can cause a new belt to seat incorrectly and wear out early. Inspect the grooves and alignment first.
- How do I request a quote for the P-C108?
- Send the part number P-C108 and the quantity you need by WhatsApp or email. If you are replacing an existing belt, include the marking on the back so we can confirm the match.