V-belt Movendis P-C107.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C107.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C107.5 and any equivalents.
The Movendis P-C107.5 is a classical wrapped V-belt with a C profile and a length of 2732 mm. Before fitting it, inspect the drive and sheaves for wear, alignment, and damage that can shorten belt life.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves can cause the belt to sit too deep or slip, so measure groove width and compare with the sheave manufacturer's limits. Confirm that the sheaves are aligned and that the belt will run straight in the grooves.
Verify that the replacement belt matches the old one: C profile, 2732 mm length, 22 mm top width, 14 mm height, and 40° angle. If the old belt is worn or stretched, use the part number rather than the old belt's dimensions. Send the part number and a photo of the belt marking for a quote.
After fitting, check tension according to the drive manufacturer's procedure and recheck after the first hours of operation. Keep sheaves clean and free of oil or debris. Replacing all belts on a multi-belt drive at the same time helps maintain even load sharing.
Dimensions
- Section
- C
- Length
- 2732mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, and verify alignment. Worn or misaligned sheaves can cause the new belt to slip or wear quickly.
- How do I confirm the P-C107.5 is the right belt?
- Match the profile and length: C profile, 2732 mm length, 22 mm top width, 14 mm height, and 40° angle. If the old belt marking is unreadable, provide the drive model and sheave dimensions.
- How do I request a quote?
- Send the part number P-C107.5 via WhatsApp or email. Our team can confirm the belt or suggest an equivalent based on your drive details.