V-belt Movendis P-BB144
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-BB144 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-BB144 and any equivalents.
The Movendis P-BB144 is a double-V (hexagonal) belt in the BB profile with a length of 3658 mm. We carry it for drives that need power transmitted from both sides of the belt. This page covers how to match it to the belt you are replacing.
Start by reading the marking on the back of the belt you are taking off. The part number should read P-BB144. Confirm the profile is BB and the length is 3658 mm. A double-V belt has a hexagonal cross-section and drives from both faces, so a standard single-V belt is not a substitute in the same position.
If the old marking is worn or unreadable, measure the outside length and compare it with 3658 mm. Check the profile against the BB designation. If the drive runs two or more belts side by side, replace them as a set so the load stays even.
Before ordering, inspect the sheaves for wear, alignment and debris, and check the tensioner. Send the part number P-BB144, the profile and the length to our team by WhatsApp or email. We reply promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BB
- Length
- 3658mm
Frequently asked questions
- How do I confirm the Movendis P-BB144 is the belt I need?
- Read the marking on the back of the belt being replaced. It should show P-BB144. Confirm the profile is BB and the length is 3658 mm. If the marking is gone, measure the outside length and check the cross-section.
- What should I send to request a quote?
- Send the part number P-BB144, the profile BB and the length 3658 mm by WhatsApp or email. If you are replacing a set, include the quantity of belts on the drive.
- Should I replace double-V belts in sets?
- Yes. When a drive uses two or more belts side by side, replace them as a set so they share the load evenly. Check sheave wear and alignment at the same time.