V-belt Movendis P-BB136
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-BB136 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-BB136 and any equivalents.
The Movendis P-BB136 is a double-V (hexagonal) belt in the BB profile with a length of 3454 mm. It is built for drives that need power transmitted from both sides of the belt, where a standard V-belt will not fit the pulley arrangement. Before you install it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check each sheave for worn grooves, cracks, burrs or embedded debris. A groove that has worn wide will let the belt sit too deep, so it slips and overheats even when the belt itself is correct. Clean the grooves and confirm the sheaves are aligned with each other, because misalignment is a common cause of short belt life on double-V drives.
Measure the old belt and compare it with the P-BB136. The BB profile and 3454 mm length identify this belt, and the marking on the back of the old belt is the fastest way to confirm what came off. If the drive uses more than one belt, replace the full set at the same time so the load is shared evenly across all belts.
Once the sheaves are clean, aligned and in good condition, fit the belt without forcing it over the grooves. Tension it to the drive manufacturer's specification, then recheck tension after the first run-in period. Send the part number P-BB136 by WhatsApp or email to request a quote, and the team can help confirm the belt or suggest an equivalent.
Dimensions
- Section
- BB
- Length
- 3454mm
Frequently asked questions
- What does the P-BB136 fit?
- This is a Movendis double-V (hexagonal) belt in the BB profile with a length of 3454 mm. It suits drives that require a belt to grip on both sides. Share your drive details and the old belt marking so we can help confirm it.
- Why check the sheaves before installing a new double-V belt?
- Worn, dirty or misaligned sheaves will damage a new belt quickly. Inspect the grooves for wear and debris, and check alignment before fitting the P-BB136 so the belt seats correctly and runs at the right tension.
- How do I request a quote for the P-BB136?
- Send the part number P-BB136 by WhatsApp or email. If you are unsure, include the old belt marking and the drive details, and the team can confirm the belt or suggest an equivalent.