V-belt Movendis P-B90
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B90 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B90 and any equivalents.
The Movendis P-B90 is a classical wrapped V-belt in profile B with a length of 2286 mm. It is built to a 17 mm top width, 11 mm height and a 40° angle. This page covers how to match it to the belt you are replacing.
The most reliable way to match a replacement is to read the marking on the back of the old belt. Compare the profile letter and the length to the P-B90: profile B and 2286 mm. Then check the cross-section with a caliper. The P-B90 is 17 mm across the top and 11 mm high, with a 40° angle. A belt that matches the profile and the length but differs in width or height will not sit correctly in the pulley groove.
Before ordering, inspect the drive. Look for worn or misaligned pulleys, damaged sheaves and belts that have taken a set. If the drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves. Confirm the old belt is not a cogged or narrow wedge type; the P-B90 is a classical wrapped V-belt, and mixing types on one drive is not recommended.
To request a quote, send the part number P-B90 by WhatsApp or email. Include the profile and length from the old belt marking, and the quantity you need. If the marking is worn, send a photo of the belt and the pulley groove dimensions. Our team replies promptly and can help confirm the right belt for your drive.
Dimensions
- Section
- B
- Length
- 2286mm
Frequently asked questions
- How do I confirm the P-B90 matches my old belt?
- Read the marking on the back of the old belt and compare the profile letter and length to the P-B90: profile B and 2286 mm. Also measure the cross-section. The P-B90 is 17 mm top width, 11 mm height and a 40° angle.
- Can I replace just one belt on a multi-belt drive?
- For drives using more than one belt, replace the full set at the same time. This keeps the load even across the grooves and avoids mismatch between old and new belts.
- What information should I send for a quote?
- Send the part number P-B90, the profile and length from the old belt marking, and the quantity. If the marking is worn, include a photo of the belt and the pulley groove dimensions.