V-belt Movendis P-B88.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B88.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B88.5 and any equivalents.
The Movendis P-B88.5 is a classical wrapped V-belt with a B profile and a length of 2250 mm. It has a top width of 17 mm, a height of 11 mm, and a 40-degree angle. This belt is used in industrial drives where a classical V-belt cross-section is required.
Classical wrapped V-belts like this one are common on drives that run at moderate speeds and need a dependable grip on standard V-groove pulleys. The B profile is a widely recognized cross-section, so the first step in confirming fit is to check that the old belt is marked B or has the same top width and height. Measure the top width across the belt and the height from top to bottom; the P-B88.5 is 17 mm wide and 11 mm high.
Length is the next check. The P-B88.5 is 2250 mm long. If the old belt is not marked, measure its outside length along the back of the belt and compare it to this figure. Also confirm the pulley groove angle matches the 40-degree angle of the belt. If the old belt is worn, stretched or has missing cord, replace it rather than trying to match a used length.
When you request a quote, send the part number P-B88.5, the application, and the pulley diameters if you have them. If you are unsure whether this is the right belt, send a photo of the marking on the back of the old belt and the pulley grooves. The team can confirm the profile and length and suggest an equivalent if needed.
Dimensions
- Section
- B
- Length
- 2250mm
Frequently asked questions
- How do I confirm the P-B88.5 will fit my drive?
- Check three things: the belt profile is B, the top width is 17 mm, the height is 11 mm, and the length is 2250 mm. Also confirm the pulley groove angle is 40 degrees. If the old belt is marked B and measures the same, this belt is the correct cross-section and length.
- What should I send to get a quote for this belt?
- Send the part number P-B88.5 and the application details. If you have them, include pulley diameters and the center distance. A photo of the old belt marking and the pulley grooves helps confirm the fit.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, it is common practice to replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven tension and vibration. Confirm the set size and order the same number of belts as the drive requires.