V-belt Movendis P-B63
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B63 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B63 and any equivalents.
The Movendis P-B63 is a classical wrapped V-belt in a B profile. It is used on industrial drives where a wrapped belt is specified, such as fans, pumps, and other standard machinery. Confirm fit by matching the profile and the length to the old belt or the drive documentation.
This belt has a B profile, a 1600 mm length, a 17 mm top width, an 11 mm height, and a 40° angle. These are the dimensions to check against the belt you are replacing. If the old belt is worn or the marking is unreadable, measure the top width and the outside length, or send the drive details for confirmation.
Classical wrapped V-belts are used on drives that do not require the higher power density of a narrow wedge belt. The wrapped construction is suited to applications where the belt may run over smaller pulleys and where some slip is acceptable. Inspect pulleys for wear, alignment, and correct groove profile before installing a new belt.
When ordering, provide the part number P-B63 and the quantity. If you are replacing a set, order the same number of belts and install them together. For help confirming the right belt, send the profile, length, and a photo of the old belt marking by WhatsApp or email.
Dimensions
- Section
- B
- Length
- 1600mm
Frequently asked questions
- What does the P-B63 fit?
- The P-B63 is a B-profile classical V-belt with a 1600 mm length. It fits drives that use a B-profile belt of this length. Check the old belt marking or the drive documentation to confirm.
- How do I measure a classical V-belt?
- Measure the top width and the outside length. The P-B63 has a 17 mm top width and a 1600 mm length. If you are unsure, send a photo of the belt and the pulley dimensions.
- Can I replace just one belt in a set?
- For drives with multiple belts, replace all belts in the set at the same time. Mixing new and worn belts can cause uneven loading. Order the same number of P-B63 belts as the drive requires.