V-belt Movendis P-B510
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B510 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B510 and any equivalents.
The Movendis P-B510 is a classical wrapped V-belt with a B profile and a length of 12954 mm. When you are replacing a belt on an existing drive, matching the part number and the profile and length is the practical way to confirm you are ordering the same belt. We carry this belt and quote it by part number.
Start with the marking on the belt you are removing. If it reads P-B510, this is the belt to quote. If the marking is worn or unreadable, use the drive instead: a B profile belt has a top width of 17 mm, a height of 11 mm and a 40° angle, and the length is measured as 12954 mm. Those four values identify the belt far more reliably than a visual match.
A classical wrapped V-belt like this one is used on drives where the belt runs in a standard B-section groove. Before ordering, check the sheave grooves for wear and confirm the belt sits correctly in the groove rather than bottoming out. If the drive uses more than one belt, replace the full set so the load stays evenly distributed.
Send the part number P-B510, or the profile and length, by WhatsApp or email and the team will confirm the right belt or suggest an equivalent. Photos of the back marking and the drive help when the old belt is hard to read.
Dimensions
- Section
- B
- Length
- 12954mm
Frequently asked questions
- How do I confirm the P-B510 is the belt I need?
- Match the part number on the back of the old belt. If it is unreadable, measure the profile and length: this belt is a B profile, 12954 mm long, with a 17 mm top width, 11 mm height and 40° angle.
- What should I send to get a quote?
- Send the part number P-B510, or the profile and length if the number is not readable, by WhatsApp or email. Photos of the belt marking and the drive help the team confirm the match.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace the full set together. Mixing a new belt with worn belts on the same drive can leave the load unevenly distributed.