V-belt Movendis P-B30.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B30.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B30.5 and any equivalents.
The Movendis P-B30.5 is a classical wrapped V-belt in the B profile with a 775 mm length. The 17 mm top width, 11 mm height and 40° angle define how it seats in a B-section pulley groove. Use these dimensions to confirm the belt matches the drive before you order.
The B profile and 775 mm length are the two values that decide fit. A B-section belt rides in a pulley groove sized for a 17 mm top width and 11 mm height, so a worn groove or a mismatched section will change how the belt contacts the flanges. The 40° angle is the included angle of the belt cross-section, and it is stated here so you can compare it against the pulley groove angle on the drive.
When you replace a classical V-belt, read the marking on the back of the old belt first. It usually gives the profile and a length designation that you can match to the profile and length_mm on this page. If the marking is worn or missing, measure the outside length and the top width and compare them with the 775 mm and 17 mm listed for the P-B30.5.
Send the part number P-B30.5, or the profile and length you measured, by WhatsApp or email and the team will confirm the belt or suggest an equivalent. For drives with more than one belt, include the quantity and the position so the set can be matched.
Dimensions
- Section
- B
- Length
- 775mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The B profile means the belt has a 17 mm top width and 11 mm height and is intended for a B-section pulley groove. The 775 mm length is the belt length stated for the P-B30.5. Together they are the primary fit dimensions.
- How do I confirm this belt matches the one on my drive?
- Read the marking on the back of the old belt and compare the profile and length with the B profile and 775 mm listed here. If the marking is not readable, measure the top width and the belt length and send those values.
- What should I send to request a quote?
- Send the part number P-B30.5, or the profile and length you measured, by WhatsApp or email. If the drive uses multiple belts, include the quantity so the set can be matched.