V-belt Movendis P-B29.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B29.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B29.5 and any equivalents.
The Movendis P-B29.5 is a classical wrapped V-belt with a B profile and a 750 mm length. The 17 mm top width, 11 mm height and 40° angle define how it seats in a standard B-section pulley groove. Use these dimensions to confirm the belt matches the drive before you order.
Profile and length are the two checks that matter most here. The B profile sets the cross-section that fits the pulley groove, while the 750 mm length sets the belt path around the sheaves. A belt that is close but not exact in either dimension will not run correctly, so compare the marking on the old belt against these values.
The P-B29.5 is a wrapped classical V-belt, not a narrow wedge, cogged, banded or synchronous belt. Its 40° angle and 17 mm by 11 mm section suit standard classical B-profile drives. If the old belt is worn, oil-soaked or stretched, read its back marking rather than measuring a used belt, which can give a false length.
When you request a quote, send the part number P-B29.5 and, if you have it, the drive or equipment reference. Our team can confirm the B profile and 750 mm length against your application and help you identify the correct belt or a suitable equivalent.
Dimensions
- Section
- B
- Length
- 750mm
Frequently asked questions
- What do the profile and length tell me about the Movendis P-B29.5?
- The B profile means the belt has a 17 mm top width, 11 mm height and 40° angle for a standard classical B-section pulley groove. The 750 mm length is the belt's datum length around the drive. Both must match your existing belt or the drive specifications.
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt for the profile and length. If it reads B and 750 mm, the P-B29.5 matches. Also confirm the pulley groove is a classical B section, not a narrow wedge or other profile.
- What should I send to request a quote for the P-B29.5?
- Send the part number P-B29.5, the quantity you need, and any drive or equipment reference you have. If you are unsure about the profile or length, include a photo of the old belt marking and we can help confirm the correct belt.