V-belt Movendis P-B270
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B270 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B270 and any equivalents.
This Movendis P-B270 is a classical wrapped V-belt in the B profile, with a length of 6860 mm. It is used on drives that call for a wrapped classical belt rather than a narrow wedge or cogged design. Confirm fit by matching the profile and the length to your drive.
The P-B270 is built to the B profile: 17 mm top width, 11 mm height and a 40° angle. Its length is 6860 mm. These are the values to check against the belt you are replacing. If the old belt is worn or the marking has rubbed off, measure the outside length and compare it with 6860 mm, and check that the cross-section matches the B profile dimensions.
Classical wrapped V-belts are commonly found on industrial drives where a standard cross-section is specified. Because the P-B270 is a long belt at 6860 mm, it may run on a drive with several pulleys or a long center distance. Inspect the pulleys for wear and alignment, and check the belt for cracking, glazing or missing cover before ordering.
If you are replacing more than one belt on the same drive, order the full set so the belts are the same part number. Send the part number P-B270, or the profile and length, by WhatsApp or email and we will confirm it or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 6860mm
Frequently asked questions
- What are the dimensions of the Movendis P-B270?
- It is a B profile classical wrapped V-belt with a 17 mm top width, 11 mm height, 40° angle and 6860 mm length.
- How do I confirm this belt fits my drive?
- Check that the pulley groove matches the B profile and that the belt length is 6860 mm. If the old belt is unreadable, measure its outside length and cross-section and compare.
- What should I send to request a quote?
- Send the part number P-B270, or the profile and length, by WhatsApp or email. If you are unsure, include a photo of the old belt marking and the pulley.