V-belt Movendis P-B269

MOVENDIS P-B269 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B269 and any equivalents.

The Movendis P-B269 is a classical wrapped V-belt in the B profile, with a length of 6830 mm. When you need to identify a replacement, the marking on the back of the old belt is the fastest starting point. Read it carefully and compare it against the profile and length listed here.

The P-B269 carries a B profile, a top width of 17 mm and a height of 11 mm, with a 40 degree angle. Its length is 6830 mm. These are the figures to check against the belt currently on the drive before you order. A worn or dirty belt can be hard to read, so wipe the back and look at the full string of characters rather than just the first few.

If the marking is faded or partly rubbed off, measure the belt instead. Lay it flat and measure the outside length, then compare that figure to the 6830 mm length of the P-B269. Also confirm the cross-section: a B profile belt should show a top width near 17 mm and a height near 11 mm. If the old belt has stretched or the sides are worn, the measured width can read undersize, so treat the profile marking as the primary reference.

Send us the part number from the back of the belt, along with the profile and length if you have them, by WhatsApp or email. If the marking is unreadable, send the measured outside length and cross-section dimensions instead. Our team will confirm the P-B269 or point you to the right belt for the drive.