V-belt Movendis P-B248
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B248 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B248 and any equivalents.
The Movendis P-B248 is a classical wrapped V-belt in a B profile, 6300 mm long, with a 17 mm top width, 11 mm height and 40 degree angle. When you are replacing a belt on an existing drive, the safest approach is to match it to the belt coming off: confirm the profile, the length and the cross-section before you order.
Start with the marking on the old belt. A B profile belt should be replaced with a B profile belt, and the P-B248 gives you a 6300 mm length with a 17 mm top width, 11 mm height and 40 degree angle. If the old belt is worn or the marking is unreadable, measure the top width and the outside length and compare them to these figures.
Check the drive while the belt is off. Look at the sheave grooves for wear, and make sure the belt sits correctly in the groove rather than riding on the bottom. A wrapped classical V-belt like the P-B248 is a common choice for general industrial drives, and matching the original profile and length keeps the drive running as designed.
If you are unsure whether the P-B248 is the right replacement, send the part number from the old belt, the profile and the length. We carry Movendis belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 6300mm
Frequently asked questions
- How do I confirm the P-B248 matches my old belt?
- Compare the profile and length. The P-B248 is a B profile classical V-belt, 6300 mm long, with a 17 mm top width, 11 mm height and 40 degree angle. Check the marking on the old belt or measure it and compare those figures.
- What should I send to request a quote for this belt?
- Send the part number P-B248, or the marking from the belt you are replacing, along with the profile and length. If you have the old belt, a photo of the back marking helps us confirm it.
- Can you help if the old belt marking is worn off?
- Yes. Measure the top width and the outside length of the old belt and send those figures. We can compare them to the P-B248 and help confirm the right belt or suggest an equivalent.