V-belt Movendis P-B217
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B217 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B217 and any equivalents.
The Movendis P-B217 is a classical wrapped V-belt with a B profile and a length of 5510 mm. It measures 17 mm across the top, 11 mm in height, and has a 40° angle. This page covers how to confirm you are ordering the right belt by reading the marking on the old one.
The most reliable starting point is the marking on the back of the belt you are replacing. Look for the profile letter and the length: this belt is marked B and 5510 mm. If the old belt is worn or the print has rubbed off, measure the top width and height with a caliper and compare them to 17 mm and 11 mm. A B profile belt that matches those dimensions and the 5510 mm length is the correct replacement for this part number.
Classical wrapped V-belts like the P-B217 are used on drives where the belt runs in a standard B-section sheave. Before ordering, check the sheave groove for wear, oil or debris, and confirm the belt sits correctly in the groove without bottoming out. If you are replacing more than one belt on a multi-belt drive, order the full set at the same time so the belts share the load evenly.
To request a quote, send the part number P-B217 by WhatsApp or email. If you have the old belt in hand, include a photo of the back marking and the profile dimensions. Our team can confirm the B profile and 5510 mm length against your data and help you verify the match before you order.
Dimensions
- Section
- B
- Length
- 5510mm
Frequently asked questions
- How do I confirm the P-B217 is the right belt?
- Check the marking on the back of the old belt for the B profile and 5510 mm length. If the marking is unreadable, measure the top width (17 mm) and height (11 mm) and compare them to the data for this belt.
- What should I send with my quote request?
- Send the part number P-B217 by WhatsApp or email. If you have the old belt, a photo of the back marking and the measured top width and height help us confirm the match.
- Can I replace just one belt on a multi-belt drive?
- For drives that use more than one belt, it is best practice to replace the full set at the same time. Mixing a new belt with worn belts can cause uneven load sharing.