V-belt Movendis P-B168
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B168 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B168 and any equivalents.
The Movendis P-B168 is a classical wrapped V-belt with a B profile and a length of 4267 mm. When you need to match an existing drive, the marking on the back of the old belt is the most reliable starting point. Read it before you order.
The back of a worn belt usually carries the part number, profile and length. Look for P-B168, B, or 4267 mm. If the printing is rubbed off, measure the outside length and the top width with the belt laid flat. The P-B168 has a top width of 17 mm, a height of 11 mm and a 40-degree angle, which confirms the B profile.
Use those markings to select the replacement. The Movendis P-B168 matches the B profile and the 4267 mm length shown on the old belt. If the drive runs multiple belts, replace them as a set so the load stays even across the grooves.
Send the marking you found, or the part number P-B168, by WhatsApp or email. Our team confirms the belt and replies promptly. If the marking is unreadable, include the measured length, top width and a photo of the drive.
Dimensions
- Section
- B
- Length
- 4267mm
Frequently asked questions
- How do I read the marking on my old belt?
- Check the back of the belt for printed characters. You are looking for the part number, the profile letter and the length. On this belt the marking would show P-B168, B profile and 4267 mm.
- What if the marking is worn off?
- Measure the outside length and the top width. A B profile belt has a top width of 17 mm and a height of 11 mm. Send those measurements and we can confirm the P-B168 or the correct replacement.
- Can I replace just one belt on a multi-belt drive?
- For even load sharing, replace all belts in the set at the same time. The P-B168 is a classical wrapped V-belt with a 40-degree angle, so keep the set matched.