V-belt Movendis P-B167
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B167 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B167 and any equivalents.
The Movendis P-B167 is a classical wrapped V-belt in the B profile. It measures 4240 mm in length, with a 17 mm top width, 11 mm height and a 40-degree angle. The profile and length are the two figures to check first when matching a belt to a drive.
The B profile sets the cross-section that must sit correctly in the pulley groove: 17 mm across the top and 11 mm high, with a 40-degree angle. A belt with the wrong profile will not seat properly, so confirm these dimensions against the old belt or the drive specification before ordering.
The 4240 mm length is the datum that positions the belt around the pulleys. Because the belt is wrapped, it is suited to standard classical V-belt drives rather than cogged or synchronous applications. If you are replacing more than one belt on a multi-belt drive, replace the full set so the load is shared evenly.
To request a quote, send the part number P-B167 by WhatsApp or email. If the marking on your old belt is worn or unclear, include the profile and the length you measured, and the team can confirm the right belt for the drive.
Dimensions
- Section
- B
- Length
- 4240mm
Frequently asked questions
- What do the profile and length mean for the P-B167?
- The B profile is the cross-section: 17 mm top width, 11 mm height and a 40-degree angle. The length is 4240 mm. Both must match the drive for the belt to run correctly.
- How do I confirm the right belt if the old marking is unreadable?
- Measure the top width, height and outside length, or send photos of the old belt and the pulley grooves. The team can then confirm whether the P-B167 is the correct match.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace the full set at the same time. Belts that have run together wear together, and mixing a new belt with worn ones can cause uneven loading.