V-belt Movendis P-B128
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B128 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B128 and any equivalents.
The Movendis P-B128 is a classical wrapped V-belt built to the B profile. Its 3250 mm length and 17 mm top width identify the size a B-section drive needs, so you can match the belt to the pulley groove before the old one is removed.
The profile and length are the two dimensions that decide fit. B profile sets the cross-section: 17 mm across the top, 11 mm high, with a 40° angle that seats in a standard B groove. The 3250 mm length is the datum you compare against the drive's measured span or the marking on the belt being replaced.
Read the marking on the back of the old belt first. If it shows a B profile and a 3250 mm length, the P-B128 is the same size. When the belt is worn or the marking is gone, measure the top width and the outside length and send those figures with your quote request.
For drives running more than one belt, order the full set together so every belt in the groove has the same profile and length. Inspect the pulleys for wear or debris at the same time, since a worn groove can shorten belt life even when the size is correct.
Dimensions
- Section
- B
- Length
- 3250mm
Frequently asked questions
- What do the profile and length of the P-B128 tell me?
- The B profile gives a 17 mm top width, 11 mm height and 40° angle for a standard B-section pulley groove. The 3250 mm length is the belt's length, which you match to the drive or to the marking on the belt you are replacing.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for a B profile and a 3250 mm length. If it is unreadable, measure the top width and the outside length of the old belt and send those dimensions with your part number.
- What should I send to request a quote?
- Send the part number P-B128, the quantity, and the drive details you have. If you are unsure of the size, include the old belt's marking or your width and length measurements so we can confirm the B profile and 3250 mm length.