V-belt Movendis P-B126
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B126 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B126 and any equivalents.
This is a Movendis P-B126 classical V-belt in the B profile, with a length of 3200 mm. It is a wrapped belt with a 40-degree angle, a top width of 17 mm and a height of 11 mm. Use it where a B-profile classical V-belt of this length is specified.
Classical wrapped V-belts like this one are used on general industrial drives: fans, pumps, compressors, conveyors and similar equipment where a single or multiple V-belt drive is fitted. The B profile is a common section, and the 3200 mm length suits drives that call for that datum length. The wrapped construction is typical for these belts in everyday service.
To confirm fit, check the belt currently on the drive. Read the marking on the back of the belt: it should show the profile and length. If it reads B and 3200 mm, this P-B126 is the matching size. Also check the sheave groove: a B-profile belt sits in a groove sized for a 17 mm top width and 11 mm height. If the old belt is worn, measure the drive and compare the required length before ordering.
When you request a quote, send the part number P-B126 and the quantity you need. If you are replacing a belt on a drive with multiple belts, note how many are on the drive so the set can be matched. If the marking on the old belt is unreadable, send the machine or drive details and the team can help confirm the right belt.
Dimensions
- Section
- B
- Length
- 3200mm
Frequently asked questions
- What does the marking on the old belt need to show to match the P-B126?
- Look for the profile and length on the back of the belt. The P-B126 is a B-profile belt with a 3200 mm length. If the old belt shows B and 3200 mm, it is the same size.
- Can I use this belt on any B-profile drive?
- It fits drives that call for a B-profile belt of 3200 mm length. Check the sheave groove dimensions and the required belt length for your specific drive before ordering.
- What information should I send with my quote request?
- Send the part number P-B126 and the quantity. If you are replacing a set, include the number of belts on the drive. If the old belt marking is not clear, send the drive details so the team can help confirm the right belt.