V-belt Movendis P-B113
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B113 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B113 and any equivalents.
The Movendis P-B113 is a classical wrapped V-belt in a B profile with a 2870 mm length. To match it to the belt you are replacing, compare the profile and the length marked on the old belt. This page gives the key dimensions so you can confirm the match before requesting a quote.
The P-B113 has a top width of 17 mm, a height of 11 mm and a 40-degree angle. Its B profile and 2870 mm length are the primary selection points. If the belt you are replacing carries the same B profile and 2870 mm length, the P-B113 is the correct match for that drive position.
When the old belt is worn or the marking is unreadable, measure the top width and the outside length and compare them with the values above. For drives using multiple belts, replace all belts in the set at the same time so the load stays evenly distributed. Inspect the sheaves for wear or damage before installing the new belt.
We carry the Movendis P-B113 for maintenance, engineering and purchasing teams. To request a quote, send the part number P-B113, the quantity and the drive position by WhatsApp or email. If you are unsure of the profile or length, send a photo of the marking on the back of the old belt and our team will help confirm the right belt.
Dimensions
- Section
- B
- Length
- 2870mm
Frequently asked questions
- How do I confirm the P-B113 matches my old belt?
- Check the old belt for a B profile and a 2870 mm length. The P-B113 also has a 17 mm top width, 11 mm height and 40-degree angle. If those values match, it is the correct belt for that position.
- What should I send to request a quote?
- Send the part number P-B113, the quantity you need and the drive position. If the old belt is unreadable, send a photo of the marking on the back of the belt so we can help confirm the profile and length.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On drives that use more than one belt, replace the full set at the same time so the load is shared evenly. Inspect the sheaves for wear before installing the new belts.