V-belt Movendis P-B112.25
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B112.25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B112.25 and any equivalents.
The Movendis P-B112.25 is a classical wrapped V-belt in a B profile, 2850 mm long. It measures 17 mm across the top and 11 mm high, with a 40-degree angle. To match it to the belt you are replacing, read the marking on the back of the old belt and compare profile, length and cross-section.
Start with the belt you are taking off. Confirm the profile is B and the length is 2850 mm, then check the top width and height against the 17 mm and 11 mm of the P-B112.25. A classical wrapped V-belt of the same profile and length seats correctly in the pulley groove; a different profile or length will not.
If the old belt is worn or the marking is unreadable, measure the outside length and the cross-section, and note the pulley groove dimensions. We carry the Movendis P-B112.25 and can confirm it against the belt you are replacing. Send the part number, the belt marking or your measurements by WhatsApp or email.
Inspect the drive before fitting a replacement. Check the pulleys for wear, alignment and debris, and confirm the belt sits at the correct depth in the groove. When a drive runs more than one belt, replace the full set so the load is shared evenly.
Dimensions
- Section
- B
- Length
- 2850mm
Frequently asked questions
- How do I confirm the P-B112.25 matches my old belt?
- Compare the profile (B), the length (2850 mm), the top width (17 mm) and the height (11 mm) with the marking on the old belt. If the marking is gone, measure the old belt and the pulley grooves and send those details.
- What do you need to quote the P-B112.25?
- Send the part number P-B112.25, or the marking from your old belt, by WhatsApp or email. If you have measurements instead, include the profile, length, top width and height.
- Should I replace more than one belt at a time?
- Yes, when the drive uses multiple belts. Replacing the full set keeps the belts matched in length and shares the load evenly across the grooves.