V-belt Movendis P-B103
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B103 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B103 and any equivalents.
The Movendis P-B103 is a classical wrapped V-belt in a B profile. It measures 2616 mm in length, with a 17 mm top width, 11 mm height and a 40° angle. If you are replacing a belt, this is the page to confirm that the P-B103 matches the one coming off the drive.
To match it to the belt being replaced, start with the marking on the old belt. Confirm the profile is B and the length is 2616 mm. Then check the dimensions: 17 mm across the top, 11 mm high, and a 40° angle. The P-B103 is a classical wrapped V-belt, so it is the right family for drives that call for a classical wrapped belt rather than a narrow wedge, cogged, banded or synchronous design.
If the old belt is worn or the marking is unreadable, measure the outside length and compare it with 2616 mm. A belt that has stretched or worn narrow can measure differently, so check the profile against the pulley groove as well. Send the part number, the profile and the length you measured, and the team will confirm the P-B103 or suggest an equivalent.
The Movendis P-B103 is supplied by MR Industrial Accessories LLC to maintenance, engineering and purchasing teams in the United States, Canada, Mexico and South America. Quotes are handled by WhatsApp or email with the part number, and the team replies promptly.
Dimensions
- Section
- B
- Length
- 2616mm
Frequently asked questions
- How do I confirm the Movendis P-B103 is the belt I need?
- Check the marking on the belt being replaced for a B profile and a 2616 mm length. The P-B103 has a top width of 17 mm, a height of 11 mm and a 40° angle. If those match the old belt and the pulley groove, the P-B103 is the correct profile and length.
- What should I send to get a quote for the P-B103?
- Send the part number P-B103 by WhatsApp or email, along with the profile and length from the old belt if you have them. If the marking is unreadable, send your measurements and the team will help confirm the right belt or suggest an equivalent.
- Does the P-B103 replace a narrow wedge or cogged belt?
- No. The P-B103 is a classical wrapped V-belt in a B profile. It is intended for drives that use a classical wrapped V-belt, not a narrow wedge belt or a cogged belt. Confirm the profile and length against the belt being replaced.