V-belt Movendis P-B101.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B101.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B101.5 and any equivalents.
The Movendis P-B101.5 is a classical wrapped V-belt in a B profile, 2578 mm long. It measures 17 mm across the top and 11 mm high, with a 40-degree angle. If you are replacing a belt on an existing drive, this page gives you the numbers to check before you order.
The most reliable way to match a replacement is to read the belt that is coming off. Look for the part number on the back of the belt and compare it with P-B101.5. Then confirm the profile letter and the length: B profile, 2578 mm. Measure the top width and height if the old belt is worn or the marking is gone, and check the angle at 40 degrees. A belt that matches on all of these points fits the same drive.
Classical wrapped V-belts like this one are used on industrial drives where the sheave groove and belt profile must agree. A B profile belt will not sit correctly in a sheave cut for another profile, and a length that is off will change the center distance or the tension setting. If the drive runs more than one belt, replace the full set at the same time so the load stays even across the grooves.
For a quote, send the part number P-B101.5 and the quantity you need. If you are unsure whether this is the right belt, send the marking from the old belt, the profile, the length in millimeters, and the top width and height. Our team can confirm the match or point you to an equivalent.
Dimensions
- Section
- B
- Length
- 2578mm
Frequently asked questions
- How do I confirm the Movendis P-B101.5 matches my old belt?
- Compare the part number on the back of the old belt with P-B101.5. Also check the profile (B), the length (2578 mm), the top width (17 mm), the height (11 mm) and the angle (40 degrees). If these match, the belt fits the same drive.
- What should I send to get a quote for this belt?
- Send the part number P-B101.5 and the quantity. If you want us to verify the match first, include the marking from the old belt or the profile and length you measured.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On a drive that uses more than one belt, replacing the full set keeps the load even across the grooves. Mixing a new belt with worn belts can cause the new one to carry more than its share.