V-belt Movendis P-A85.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A85.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A85.5 and any equivalents.
The Movendis P-A85.5 is a classical wrapped V-belt with an A profile and a 2170 mm length. To match it to the belt being replaced, compare the profile and the length marked on the old belt. The 13 mm top width, 8 mm height and 40° angle confirm the cross-section.
Start by reading the marking on the back of the belt you are replacing. The profile letter and length number are the two values that must line up with the P-A85.5. If the old belt is worn or the marking is gone, measure the top width and the outside length, then compare them with the 13 mm top width and 2170 mm length listed for this belt.
The 40° angle and 8 mm height complete the cross-section. A belt that is too narrow or too short will not sit correctly in the pulley groove, and one that is too wide or too long will not transmit load as intended. Confirm all four values before ordering.
We carry the Movendis P-A85.5 classical wrapped V-belt. Send the part number by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt, include the old belt's marking and the pulley groove dimensions, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2170mm
Frequently asked questions
- How do I confirm the P-A85.5 matches the belt I am replacing?
- Check the profile letter and length marking on the old belt against the A profile and 2170 mm length of the P-A85.5. Also compare the top width and height with the 13 mm and 8 mm values listed for this belt.
- What measurements identify this belt?
- The P-A85.5 has an A profile, a 2170 mm length, a 13 mm top width, an 8 mm height and a 40° angle.
- What should I send to request a quote?
- Send the part number P-A85.5 by WhatsApp or email. If you need help confirming the belt, include the marking from the old belt and the pulley groove dimensions.