V-belt Movendis P-A84.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A84.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A84.5 and any equivalents.
When you read the back of an old belt, the marking tells you the profile and the length before you order. This page covers the Movendis P-A84.5, a classical wrapped V-belt in the A profile with a 2150 mm length. Use the marking to match the belt you are replacing, then send us the part number for a quote.
The P-A84.5 is a classical wrapped V-belt in the A profile. It measures 2150 mm in length, 13 mm across the top, 8 mm in height, and has a 40° angle. These are the dimensions to check against the belt you are removing, since a drive may accept more than one profile and length combination.
Start with the marking printed on the back of the old belt. Note the profile letter and the length, then compare them with the P-A84.5 data above. If the marking is worn or unreadable, measure the top width, height and outside length of the belt and send those figures with the part number you have.
Write to us through WhatsApp or email with the part number P-A84.5 and the machine or drive it fits. Our team can confirm the profile and length against your data and help you identify the correct belt for the application.
Dimensions
- Section
- A
- Length
- 2150mm
Frequently asked questions
- How do I confirm the P-A84.5 is the right belt?
- Read the marking on the back of the old belt and compare the profile and length with the P-A84.5. This belt is an A profile, 2150 mm long, 13 mm top width, 8 mm height, with a 40° angle.
- What information should I send with my quote request?
- Send the part number P-A84.5, the marking from the old belt if it is readable, and the machine or drive it fits. If the marking is gone, include the measured top width, height and outside length.
- Can you help if the marking on my old belt is unreadable?
- Yes. Send the part number you have plus the measured dimensions of the old belt. We will compare them with the P-A84.5 profile and length to confirm the match.