V-belt Movendis P-A76
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A76 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A76 and any equivalents.
The Movendis P-A76 is a classical wrapped V-belt in the A profile, with a 1930 mm length, 13 mm top width, 8 mm height and 40° angle. It is used on industrial drives where a classical A-section belt is specified. To confirm fit, match the profile and length to the drive's current belt or sheave requirements.
Classical wrapped V-belts like the P-A76 are common on fans, pumps, compressors and other general industrial drives. The A profile with a 40° angle seats in standard A-section sheaves, and the 1930 mm length suits drives where that center distance and pulley combination is called out. If you are replacing an existing belt, check the marking on the back of the old belt for the profile and length before ordering.
Because the P-A76 is a wrapped classical belt, it is a good choice for drives that run in normal industrial conditions and need a dependable, familiar construction. When you request a quote, send the part number P-A76 along with the quantity and any drive details you have. If the old belt is worn or the marking is unreadable, measure the outside length and top width, or send a photo of the belt and sheaves.
For drives that use multiple belts, replace all belts in the set at the same time so they share the load evenly. Inspect sheaves for wear, alignment and debris before installing new belts, and check tension after the first few hours of running. The Movendis P-A76 is a direct replacement when the profile and length match your application.
Dimensions
- Section
- A
- Length
- 1930mm
Frequently asked questions
- How do I confirm the Movendis P-A76 fits my drive?
- Check the belt marking on your existing belt for the A profile and 1930 mm length. You can also measure the top width (13 mm) and height (8 mm) and compare to the sheave groove. If you are unsure, send the part number and a photo of the drive for confirmation.
- What does the P-A76 part number tell me?
- The part number identifies this as a Movendis classical wrapped V-belt in the A profile with a 1930 mm length. Always match the profile and length to your drive rather than relying on the part number alone.
- Can I replace just one belt in a multi-belt drive?
- For drives with multiple belts, it is best to replace the full set at once. Belts that have run together wear evenly, and mixing old and new belts can cause uneven loading. Order the quantity you need by part number P-A76.