V-belt Movendis P-A75.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A75.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A75.5 and any equivalents.
The Movendis P-A75.5 is a classical wrapped V-belt in profile A with a length of 1920 mm. We carry this belt for maintenance, engineering and purchasing teams who select by profile and length. The 13 mm top width, 8 mm height and 40° angle define the cross-section that must match the drive.
Profile and length are the two numbers that decide whether a classical V-belt fits. Profile A sets the cross-section: 13 mm across the top, 8 mm high, with a 40° angle that seats in the pulley groove. The length of 1920 mm is the datum you match against the old belt or the drive specification. If the profile is right but the length is wrong, the belt will not tension correctly.
When you send a quote request, include the part number P-A75.5 and confirm the profile and length from the existing belt. The marking on the back of a classical wrapped belt typically shows the profile and length, so a photo or a clear note of those characters helps us confirm the exact belt. If the marking is worn, measure the top width and the outside length and send those values with the part number.
Dimensions
- Section
- A
- Length
- 1920mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- Profile A gives a 13 mm top width, 8 mm height and 40° angle. The length is 1920 mm. Together they define the cross-section and the length you match to the drive.
- How do I confirm P-A75.5 is the right belt?
- Check the marking on the back of the old belt for the profile and length, or measure the top width and outside length. Send the part number and those values for confirmation.
- What should I send for a quote?
- Send the part number P-A75.5 and the profile and length from your drive or old belt. If you have a photo of the back marking, include it so we can confirm the belt.