V-belt Movendis P-A72
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A72 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A72 and any equivalents.
The Movendis P-A72 is a classical wrapped V-belt with an A profile and a length of 1830 mm. Its 13 mm top width, 8 mm height and 40° angle match the standard dimensions of an A-section belt. This page helps you confirm the P-A72 against the marking on your old belt before you request a quote.
Start by reading the marking on the back of the belt you are replacing. Look for the part number, the profile letter and the length. The P-A72 carries the A profile and a length of 1830 mm, with a top width of 13 mm and a height of 8 mm. If the old belt is worn or the marking is faint, measure the top width and the outside length and compare them to these figures.
The Movendis P-A72 belongs to the Classical Wrapped V-Belts series. The 40° angle is part of the belt's cross-section geometry. When you send your request, include the part number P-A72 and any marking you can read from the old belt. If the belt runs in a set, note how many belts the drive uses so the whole set can be matched.
Dimensions
- Section
- A
- Length
- 1830mm
Frequently asked questions
- How do I confirm the Movendis P-A72 is the right belt?
- Read the marking on the back of the old belt. Compare the profile letter and length to the P-A72, which is an A-profile belt with a length of 1830 mm, a top width of 13 mm and a height of 8 mm. If the marking is unreadable, measure the old belt and send those dimensions with your request.
- What should I include when I request a quote for the P-A72?
- Send the part number P-A72, the profile and length from the old belt marking, and the number of belts in the drive if it runs as a set. Photos of the back of the old belt help confirm the profile and length.
- Does the P-A72 have a 40° angle?
- Yes. The Movendis P-A72 is listed with a 40° angle, a top width of 13 mm, a height of 8 mm and a length of 1830 mm.