V-belt Movendis P-A71
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A71 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A71 and any equivalents.
The Movendis P-A71 is a classical wrapped V-belt in the A profile. It measures 1800 mm in length, with a 13 mm top width, 8 mm height and a 40° angle. This belt is used on industrial drives where a classical profile is specified, such as fans, pumps, compressors and other general machinery.
To confirm fit, check the drive's pulley groove profile and the required belt length. The P-A71 has an A profile and an 1800 mm length, so it will seat correctly only in an A-section pulley and must match the drive's center distance. The 13 mm top width, 8 mm height and 40° angle are the dimensions to compare against the old belt or the equipment's belt specification.
When replacing a classical V-belt, inspect the pulleys for wear, alignment and debris before installing the new belt. If the drive uses multiple belts, replace them as a set so the load is shared evenly. After installation, check tension according to the equipment manual and recheck after the first run-in period.
For a quote, send the part number P-A71 and the quantity you need. If you are unsure whether this is the correct belt, include the old belt's marking, the pulley groove profile and the drive's center distance. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1800mm
Frequently asked questions
- What is the profile and length of the Movendis P-A71?
- The P-A71 is an A-profile classical V-belt with a length of 1800 mm. Its top width is 13 mm, height is 8 mm and angle is 40°.
- How do I confirm this belt fits my drive?
- Check that the pulley groove is an A profile and that the required belt length is 1800 mm. Compare the 13 mm top width, 8 mm height and 40° angle with the old belt or the equipment specification.
- What should I send to request a quote?
- Send the part number P-A71 and the quantity you need. If you want help confirming the fit, also include the old belt's marking, the pulley groove profile and the drive's center distance.