V-belt Movendis P-A28.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A28.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A28.5 and any equivalents.
This Movendis P-A28.5 is a classical wrapped V-belt with an A profile and a 720 mm length. It measures 13 mm across the top, 8 mm in height, and has a 40° angle. Classical wrapped V-belts are commonly used on industrial drives such as fans, pumps, and compressors, where the belt runs in a matched groove.
To confirm fit, check the old belt's marking and measure its outside length. The profile must match the pulley groove: an A profile belt sits in an A section pulley. The 720 mm length and 13 mm top width are the key dimensions to compare. If the drive uses multiple belts, replace them as a set so tension is shared evenly.
Inspect pulleys for wear, alignment, and debris before installing a new belt. A worn groove can cause the belt to sit too deep and slip. Set tension according to the drive maker's specification, then recheck after the first run-in period. Keep the belt clean and free of oil or grease.
When you request a quote, send the part number P-A28.5 and the quantity. If you are unsure about the profile or length, include a photo of the belt marking and the pulley groove. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 720mm
Frequently asked questions
- How do I confirm that the P-A28.5 fits my drive?
- Check the old belt's marking for the profile and length. This belt is A profile with a 720 mm length, 13 mm top width, 8 mm height, and 40° angle. Compare those dimensions to your pulley groove and the old belt.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in the set at the same time. Mixed wear can cause uneven tension and premature failure.
- What information should I send for a quote?
- Send the part number P-A28.5 and the quantity you need. If you want help confirming the fit, include the belt marking and a photo of the pulley groove.