V-belt Movendis P-A26.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A26.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A26.5 and any equivalents.
The Movendis P-A26.5 is a classical wrapped V-belt with an A profile and a length of 680 mm. It is used on driven equipment where a 13 mm top width and 8 mm height fit the pulley groove. Confirm fit by comparing the profile and length to the belt you are replacing.
Classical wrapped V-belts like this one are common on fans, pumps, compressors and other constant-speed drives. The A profile and 680 mm length place it in a size range that suits light to medium-duty machinery. The 40-degree angle is the standard V shape that seats in the pulley groove.
To confirm the right belt, check the marking on the back of the old belt and measure the outside length. Match the A profile, the 680 mm length, the 13 mm top width and the 8 mm height. If the drive uses multiple belts, replace the full set at the same time so all belts share the load evenly.
When you request a quote, send the part number P-A26.5 and the quantity you need. If you are unsure, include the old belt marking, the pulley groove width and the center distance between pulleys. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 680mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the old belt marking for an A profile and a 680 mm length. Also confirm the top width is 13 mm and the height is 8 mm. If those match, the P-A26.5 is the correct size.
- What should I send to get a quote?
- Send the part number P-A26.5 and the quantity. If you are replacing a belt without a readable marking, include the pulley groove width and the center distance between pulleys.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, install a complete set so the belts are the same length and share the load. Mixing new and worn belts can cause uneven tension and premature wear.