V-belt Movendis P-A26.25
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A26.25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A26.25 and any equivalents.
The Movendis P-A26.25 is a classical wrapped V-belt in an A profile, 670 mm long. It is built for standard industrial drives that use A-section sheaves. Before you fit a replacement, inspect the drive and sheaves so the new belt runs true and wears evenly.
This belt has a top width of 13 mm, a height of 8 mm and a 40-degree angle. Those dimensions match the A profile and the 670 mm length noted in the part number. When you read the marking on the back of an old belt, compare the profile and length to this listing to confirm you are ordering the same size.
Worn sheave grooves are a common cause of short belt life. Check the grooves for wear, rust or burrs, and confirm the sheaves are aligned and tight on the shaft. If a drive uses more than one belt, replace the full set at the same time so the load stays evenly shared. Send the part number and the quantity you need by WhatsApp or email, and we will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 670mm
Frequently asked questions
- What are the dimensions of the Movendis P-A26.25?
- It is an A-profile classical wrapped V-belt with a 670 mm length, a 13 mm top width, an 8 mm height and a 40-degree angle.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length to the P-A26.25. You can also measure the top width and the outside length of the old belt. If you are unsure, send us the part number and drive details and we will help confirm it.
- What should I check on the drive before fitting a new belt?
- Inspect the sheave grooves for wear, rust or burrs, and check that the sheaves are aligned and secure. On multi-belt drives, fit a complete set of belts at the same time.