V-belt Movendis P-A167
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A167 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A167 and any equivalents.
The Movendis P-A167 is a classical wrapped V-belt with an A profile and a length of 4250 mm. If you are replacing an existing belt, the marking on the old belt is the fastest way to confirm you are ordering the same size.
Check the back of the belt you are removing for a part number or a printed size. Match it against the P-A167: profile A, length 4250 mm, top width 13 mm, height 8 mm, and a 40-degree angle. If the old belt is worn or the marking has rubbed off, measure the outside length and compare it to the 4250 mm figure before you order.
A wrapped classical V-belt like this one is used on drives where the sheave groove and belt profile must line up. Before fitting the replacement, inspect the sheaves for wear, oil, or debris, and check that the drive is aligned. Confirm the belt sits correctly in the groove and that the tension is set to the drive manufacturer's specification.
Dimensions
- Section
- A
- Length
- 4250mm
Frequently asked questions
- How do I confirm the P-A167 is the right belt for my drive?
- Read the marking on the belt you are replacing and compare it with the P-A167: A profile, 4250 mm length, 13 mm top width, 8 mm height, and 40-degree angle. If the marking is not readable, measure the old belt and match the profile and length.
- What information should I send with my quote request?
- Send the part number P-A167, the quantity you need, and any details from the old belt or drive nameplate. If you are unsure of the profile or length, include a photo of the belt marking and the sheave.
- Can you help if the P-A167 is not the exact belt I need?
- Yes. Send the part number from your old belt and the drive details. We can confirm the correct profile and length and suggest an equivalent belt from the lines we carry.