V-belt Movendis P-A15
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A15 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A15 and any equivalents.
The Movendis P-A15 is a classical wrapped V-belt in the A profile. It measures 382 mm in length, with a 13 mm top width, an 8 mm height and a 40° angle. Use these dimensions to match it against the belt you are replacing.
Matching a classical V-belt starts with the marking on the belt being replaced. Confirm the profile is A, then check the length against the 382 mm figure and the cross-section against the 13 mm top width and 8 mm height. If the old belt is worn or the marking is unreadable, measure the outside length and the top width with the belt laid flat.
The 40° angle is part of the A profile geometry and should agree with the pulley groove the belt runs in. A belt that sits too high or too low in the groove, or that shows uneven wear across the top width, points to a mismatch or a worn pulley. Inspect the drive before ordering so the replacement is not damaged by the same condition.
We carry the Movendis P-A15 for maintenance, engineering and purchasing teams in the United States, Canada, Mexico and South America. Send the part number and the quantity you need by WhatsApp or email, and our team will reply promptly to confirm the belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 382mm
Frequently asked questions
- How do I confirm the P-A15 is the right belt?
- Check the marking on the belt you are replacing for the A profile, then compare the length to 382 mm and the cross-section to the 13 mm top width and 8 mm height. If the marking is gone, measure the old belt.
- What are the dimensions of the Movendis P-A15?
- It is an A profile classical wrapped V-belt, 382 mm in length, 13 mm top width, 8 mm height, with a 40° angle.
- What should I send to request a quote?
- Send the part number P-A15 and the quantity you need by WhatsApp or email. If you are unsure of the profile or length, include the marking from the old belt or its measurements.