V-belt Movendis P-A148
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A148 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A148 and any equivalents.
The Movendis P-A148 is a classical wrapped V-belt with an A profile and a 3750 mm length. This page is for maintenance and purchasing teams who need to match a belt that is already in service. The most reliable way to confirm the replacement is to read the marking on the back of the old belt and compare it to this part number.
Start by locating the belt's marking. A classical wrapped V-belt like the P-A148 carries its profile and length on the back. If the old belt reads A and 3750 mm, this is the same size. The belt has a top width of 13 mm, a height of 8 mm and a 40-degree angle, so it fits the same pulley groove as the belt being replaced.
When you cannot read the marking, measure the outside length along the back of the belt and check the top width with a caliper. Confirm the cross-section is A rather than a narrow wedge or cogged profile. If the drive uses more than one belt, replace the full set so the load stays even across the grooves.
Send the part number or the marking from your old belt by WhatsApp or email and the team will confirm the A profile and 3750 mm length. If you are unsure between this belt and another, include the drive details and a photo of the marking.
Dimensions
- Section
- A
- Length
- 3750mm
Frequently asked questions
- How do I confirm the Movendis P-A148 is the right replacement?
- Read the marking on the back of the belt you are replacing. If it shows an A profile and a 3750 mm length, the P-A148 matches that size. You can also measure the outside length and check the top width against 13 mm.
- What are the dimensions of this belt?
- The P-A148 has an A profile, a length of 3750 mm, a top width of 13 mm, a height of 8 mm and a 40-degree angle.
- Can you help if the old belt marking is worn off?
- Yes. Send the part number you have, the drive details and a photo of the old belt by WhatsApp or email. The team will help confirm the A profile and 3750 mm length.