V-belt Movendis P-A147

MOVENDIS P-A147 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A147 and any equivalents.

The Movendis P-A147 is a classical wrapped V-belt in the A profile, with a 3737 mm length, 13 mm top width, 8 mm height and a 40-degree angle. When you need to match a drive, start by reading the marking on the back of the old belt. If that marking is worn or unreadable, the part number P-A147 identifies this exact belt.

The back of a used V-belt usually carries the profile and the part number, and that marking is the fastest way to confirm what the drive was built around. Read it before you measure anything, then check the profile letter and the length against the drive. For this belt, the profile is A and the length is 3737 mm, with a 13 mm top width and 8 mm height.

If the marking has rubbed off, work from the drive instead. Confirm the sheave groove matches an A profile, then measure the belt length along the outside. The P-A147 is a classical wrapped V-belt from the Movendis Classical Wrapped V-Belts series, with a 40-degree angle, so it seats in a standard A-section groove.

Send the part number P-A147, or a photo of the old belt marking, by WhatsApp or email and the team will confirm the belt or suggest an equivalent. If the drive uses more than one belt, include the number of belts in the set so the replacement can be matched as a set.