V-belt Movendis P-A142
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A142 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A142 and any equivalents.
The Movendis P-A142 is a classical wrapped V-belt in the A profile, built to run standard A-section drives. When you are replacing a worn belt, match the profile and the length on the old part before you order.
The P-A142 measures 3605 mm in length, with a 13 mm top width, an 8 mm height and a 40° angle. These are the dimensions to compare against the belt you are removing. Check the marking on the back of the old belt for the profile letter and length; if the numbers line up with the P-A142, it is the correct replacement.
A wrapped classical V-belt like this one is used on drives where the sheave groove is cut for an A-section belt. Confirm the sheave profile matches the belt profile before installation, and inspect the sheaves for wear or debris while the belt is off. If the old belt has stretched, glazed or cracked, the P-A142 is the direct size to specify.
If the marking on the old belt is unreadable, measure the outside length and the top width of the belt and send those figures with your quote request. We carry the Movendis P-A142 and can confirm it against the belt you are replacing.
Dimensions
- Section
- A
- Length
- 3605mm
Frequently asked questions
- How do I match the Movendis P-A142 to the belt I am replacing?
- Compare the profile and length. The P-A142 is an A profile belt with a 3605 mm length, a 13 mm top width, an 8 mm height and a 40° angle. If your old belt carries the same A profile and length marking, it is the matching size.
- What should I send to request a quote for this belt?
- Send the part number P-A142, or if you are replacing an unmarked belt, send the profile and length from the old belt along with the top width. You can request a quote by WhatsApp or email and we will confirm the size.
- Can I replace just one belt in a multi-belt drive?
- On a drive with more than one belt, replacing the full set at the same time is common practice so the belts share the load evenly. If you are unsure, send the drive details with your quote request and we can help you confirm the right quantity.