V-belt Movendis P-A140
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A140 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A140 and any equivalents.
The Movendis P-A140 is a classical wrapped V-belt in the A profile, with a 3550 mm length. For a maintenance or purchasing professional, the profile and length are the two figures that decide whether this belt fits the drive. This page gives the exact dimensions so you can check them against the belt you are replacing.
The A profile sets the cross-section: 13 mm top width and 8 mm height, with a 40° angle. That section has to match the pulley groove, so confirm the old belt carries an A marking before you order. The 3550 mm length is the datum to compare next, measured as listed for this belt.
Because the P-A140 is a classical wrapped V-belt, it suits standard industrial drives rather than a cogged, banded or synchronous construction. When you read the back of the old belt, look for the profile letter and the length together, not one without the other. If the marking is worn or the belt has stretched, measure the drive and send both figures.
To request a quote, send the part number P-A140, or the profile and length you need. If the belt on the drive is marked differently, send that marking and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 3550mm
Frequently asked questions
- What do the profile and length tell me about the P-A140?
- The A profile gives a 13 mm top width, 8 mm height and 40° angle, and the length is 3550 mm. Match both to the pulley groove and the drive before ordering.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the old belt. You are looking for the A profile and the length; if it is unreadable, measure the drive and send those figures.
- What should I send to get a quote?
- Send the part number P-A140, or the profile and length you need. If the old belt is marked differently, send that marking so the team can confirm the right belt.