V-belt Movendis P-A127
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A127 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A127 and any equivalents.
The Movendis P-A127 is a classical wrapped V-belt in the A profile, with a 3225 mm length, 13 mm top width, 8 mm height and a 40° angle. The profile and length are the two dimensions that identify this belt on a drive. Use them to match the belt you are replacing or to specify the size you need.
The A profile sets the cross-section: 13 mm across the top and 8 mm high, with a 40° angle that seats in a standard A-section pulley groove. The 3225 mm length is the belt's datum length, so a replacement must carry the same A profile and the same 3225 mm figure. A belt with a different profile or length will not sit correctly in the drive or maintain the intended speed ratio.
Movendis supplies this belt in the Classical Wrapped V-Belts series. The wrapped construction is the standard build for classical V-belts used on industrial drives. When you send a quote request, include the part number P-A127 and the drive details so the belt can be confirmed against the application.
For a correct replacement, read the marking on the back of the old belt and compare it with the profile and length above. If the marking is worn or missing, measure the top width and the outside length of the old belt and send those figures with your request.
Dimensions
- Section
- A
- Length
- 3225mm
Frequently asked questions
- What do the profile and length tell me about the P-A127?
- The A profile gives the cross-section: 13 mm top width, 8 mm height and a 40° angle. The 3225 mm length is the belt's datum length. Together they identify the belt size on a classical V-belt drive.
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt. It should show an A profile and a 3225 mm length. If the marking is not readable, measure the top width and the outside length of the old belt and compare them with the figures above.
- What should I send with my quote request?
- Send the part number P-A127, the drive it fits and any details from the old belt marking. Photos of the belt and the pulley grooves help confirm the profile and length before you order.