V-belt Movendis P-A125
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A125 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A125 and any equivalents.
The Movendis P-A125 is a classical wrapped V-belt with an A profile and a length of 3175 mm. It is used on industrial drives where a standard classical cross-section is required. Confirm fit by matching the profile and the length marked on the belt.
This belt has a top width of 13 mm, a height of 8 mm and a 40-degree angle. These dimensions define the A profile, so the replacement must match the same profile and the same 3175 mm length. Check the drive sheaves for wear or damage before installing a new belt.
The P-A125 is a wrapped classical V-belt, not a narrow wedge, cogged or synchronous belt. It suits drives designed for classical A-section belts. If the old belt marking is worn, measure the outside length and confirm the profile before ordering.
To request a quote, send the part number P-A125, the profile and the length. If you are unsure of the correct belt, send the marking from the back of the old belt and the sheave dimensions. The team can confirm the right belt for your drive.
Dimensions
- Section
- A
- Length
- 3175mm
Frequently asked questions
- What is the profile and length of the Movendis P-A125?
- It is an A profile classical V-belt with a length of 3175 mm, a top width of 13 mm and a height of 8 mm.
- How do I confirm this belt fits my drive?
- Match the A profile and the 3175 mm length to the old belt or the drive requirements. Check that the sheave groove is suitable for a classical A-section belt.
- What information should I send to request a quote?
- Send the part number P-A125, the profile and the length. If you have the old belt, include the marking from the back and the sheave dimensions.