Timing belt Movendis P-992-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-992-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-992-D/8M-180 and any equivalents.
The Movendis P-992-D/8M-180 is a double-sided timing belt in the Curvilinear series, with a 992 mm length. Double-sided construction lets one belt drive pulleys on both faces, which suits reversing or serpentine timing layouts where a standard single-sided belt will not fit.
This belt is used on drives that require power take-off from both sides of the belt, such as certain industrial timing applications with counter-rotating shafts or multiple driven pulleys. Because both faces carry teeth, the belt must be routed correctly and the pulleys must match the profile.
To confirm fit, compare the part number on the back of the old belt with P-992-D/8M-180 and check the 992 mm length against your drive layout. If you are unsure, send the belt marking and a photo of the drive to our team; we can help confirm the right belt or suggest an equivalent.
When replacing a double-sided timing belt, inspect both pulley sets for worn teeth, proper alignment and tension. Replacing the belt before failure helps avoid unplanned downtime on critical equipment.
Dimensions
- Length
- 992mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Check the part number printed on the back of your existing belt and compare it with P-992-D/8M-180. Also verify the 992 mm length and that your drive uses pulleys on both sides of the belt. If you need help, send us the marking and a photo of the drive.
- Can I use a single-sided timing belt instead?
- No. A single-sided belt cannot drive pulleys on both faces. This double-sided belt is designed for drives where teeth on both sides are required to transmit power.
- What should I send to request a quote?
- Send the part number P-992-D/8M-180, the quantity you need, and any details about your drive or old belt marking. Our team will reply promptly by WhatsApp or email.