Timing belt Movendis P-990-T5-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Metric Tooth Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-990-T5-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-990-T5-450 and any equivalents.
The Movendis P-990-T5-450 is a metric tooth timing belt with a T5 profile, a 990 mm length, and a 5 mm pitch. When replacing a timing belt, the most reliable match comes from the marking on the back of the old belt. That marking usually carries the profile and length you need to confirm.
Start by reading the back of the belt being replaced. You are looking for the profile and the length, in this case T5 and 990 mm. The 5 mm pitch is the distance from one tooth center to the next, and it is part of how the T5 profile is defined. If the old belt is worn or the marking is hard to read, measure the length along the back of the belt and count the teeth to confirm the profile.
A T5 profile will not interchange with other tooth profiles, so the profile and length must both match. Once you have those two values from the old belt, compare them to the P-990-T5-450. If the marking reads T5 and 990 mm, this belt is the correct size to quote.
Send the part number or the marking from your old belt by WhatsApp or email. Our team replies promptly and can confirm the right belt or suggest an equivalent. If you are unsure of the profile, a photo of the old belt marking helps us verify it.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 990mm
Frequently asked questions
- How do I confirm the P-990-T5-450 matches my old belt?
- Read the marking on the back of the old belt. You need to see T5 for the profile and 990 mm for the length. The 5 mm pitch is part of the T5 profile. If those values match, the P-990-T5-450 is the same size.
- What if the marking on my old belt is unreadable?
- Measure the length along the back of the belt and count the teeth. A T5 profile has a 5 mm pitch, so the tooth count and length will confirm the profile. Send those measurements and any photos to our team for verification.
- What information should I send for a quote?
- Send the part number P-990-T5-450, or the profile and length from your old belt, by WhatsApp or email. If you have the old belt marking, a photo of it helps us confirm the correct belt.