V-belt Movendis P-8V2120
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-8V2120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-8V2120 and any equivalents.
The Movendis P-8V2120 is a narrow wedge V-belt in the 8V profile with a length of 5385 mm. It is built for the high-power, space-limited drives where 8V belts are typically specified, such as heavy industrial fans, pumps, compressors and process machinery. This page covers where the belt is used and how to confirm it fits your drive before you order.
Narrow wedge belts carry more power per unit of width than classical V-belts, so they are common on drives that need a compact sheave set without sacrificing capacity. The 8V profile is the widest of the narrow wedge sections and is used on large, high-torque drives. The P-8V2120 is 5385 mm long, and that length is the reference point for fit: match it against the belt you are replacing, or against the drive's required belt length.
To confirm fit, read the marking on the back of the old belt and compare the profile and length. Check the sheave grooves for wear, alignment and correct section, and inspect the drive for damaged or seized components before installing a new belt. If the old belt is missing or unreadable, measure the outside length and the top width, and note the sheave groove dimensions. Send the part number P-8V2120, or those measurements, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 8V
- Length
- 5385mm
Frequently asked questions
- Where is the Movendis P-8V2120 narrow wedge V-belt used?
- It is used on 8V drives that need high power in a narrow section, typically heavy industrial fans, pumps, compressors and similar process equipment. Confirm the drive accepts an 8V profile and a 5385 mm belt length.
- How do I confirm this belt fits my drive?
- Read the marking on the back of the belt you are replacing. The profile should be 8V and the length should be 5385 mm. If the marking is unreadable, measure the outside length and top width and send those along with the part number.
- What should I send to request a quote for the P-8V2120?
- Send the part number P-8V2120 and the quantity you need by WhatsApp or email. If you are not certain of the number, send the old belt marking or your measurements and we will help confirm the right belt or suggest an equivalent.