V-belt Movendis P-8V2000
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-8V2000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-8V2000 and any equivalents.
This Movendis P-8V2000 is a narrow wedge V-belt in the 8V profile with a length of 5080 mm. Narrow wedge belts are used in heavy-duty industrial drives where a compact cross-section carries high power. Use the part number and the marking on the old belt to confirm the replacement.
On a typical drive, the belt runs in matched 8V sheaves on equipment such as compressors, fans, pumps and process machinery. The 8V profile is wider than a classical V-belt section, so check that the sheave groove is cut for 8V and that the belt sits correctly in the groove before ordering.
To confirm fit, read the marking on the back of the old belt. It should show the profile and the length, and the P-8V2000 matches an 8V profile with a 5080 mm length. Measure the outside length only if the marking is worn, and compare it with the data for this belt.
When you send your request by WhatsApp or email, include the part number P-8V2000 and the equipment or drive reference. If the old belt is unreadable, send the sheave groove profile, the number of grooves and the center distance so the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 8V
- Length
- 5080mm
Frequently asked questions
- How do I confirm that the P-8V2000 fits my drive?
- Check the marking on the back of the old belt for the profile and length, and compare it with the 8V profile and 5080 mm length of this belt. Also confirm that the sheave grooves are cut for the 8V section.
- What information should I send with my quote request?
- Send the part number P-8V2000 and, if possible, the equipment or drive reference. If the old belt marking is unreadable, include the sheave groove profile, number of grooves and center distance.
- Can you help if I am not sure about the profile or length?
- Yes. Send photos of the old belt marking and the sheave grooves by WhatsApp or email, and the team will help confirm the right belt or suggest an equivalent.