Timing belt Movendis P-880-D/S8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-880-D/S8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-880-D/S8M-180 and any equivalents.
This Movendis belt is a double-sided timing belt in the Curvilinear Double-Sided Timing Belts series, with an 880 mm length. Double-sided timing belts drive from both faces, which suits applications where two shafts must turn in opposite directions from one belt. This page covers where that construction is used and how to confirm the belt fits your drive.
A double-sided timing belt carries teeth on both faces, so it can transmit synchronous motion from either side. In practice, that means one belt can drive two opposing pulleys or a reversing arrangement without a second belt or an idler twist. It is common on drives where space is tight and the layout calls for opposite rotation, such as certain accessory or auxiliary drives.
To confirm fit, check the marking on the old belt and compare it with the part number above, then measure the belt length and compare it with the 880 mm figure. Count the tooth profile on both faces and check that the teeth engage the pulleys correctly through a full rotation. If the drive runs two belts, replace them as a set.
Send the part number, the belt marking, and the drive details by WhatsApp or email to request a quote. If the exact belt is not what your drive needs, the team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Length
- 880mm
Frequently asked questions
- What is a double-sided timing belt used for?
- It drives from both faces, so it can turn two pulleys in opposite directions from a single belt. That layout appears on drives where a reversing motion is needed and space for a second belt is limited.
- How do I confirm this belt fits my drive?
- Read the marking on the back of the old belt and compare it with the part number. Check the length against 880 mm and inspect the tooth profile on both faces where they mesh with the pulleys.
- What should I send for a quote?
- Send the part number P-880-D/S8M-180, the marking from the old belt, and any drive details you have. The team replies promptly and can help confirm the right belt or suggest an equivalent.