Timing belt Movendis P-880-D/S5M-180

MOVENDIS P-880-D/S5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-880-D/S5M-180 and any equivalents.

This Movendis P-880-D/S5M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with an 880 mm length. Double-sided timing belts are used on drives that need synchronized power from both faces of the belt, such as reversing or dual-output arrangements. Use the part number and length to confirm it matches your drive before ordering.

The belt is identified by its curvilinear profile and 880 mm length. To confirm fit, read the marking on the back of the existing belt and compare it with P-880-D/S5M-180. Also check the drive for pulley tooth profile, belt width and any guide or flange condition that could affect tracking. If the old belt is worn or the marking is unreadable, measure the length and count the teeth on the pulleys to match the drive.

Double-sided timing belts are common on applications where two shafts must turn in opposite directions or where a single belt drives two separate pulleys from opposite faces. Because both sides carry teeth, installation orientation matters. Inspect the pulleys for worn teeth, misalignment and proper tension before fitting the new belt. Replace any damaged idlers or tensioners at the same time.

For a quote, send the part number P-880-D/S5M-180 by WhatsApp or email. If you need help confirming the right belt or an equivalent, include the belt marking, pulley tooth count and a photo of the drive. The team replies promptly and can assist with selection.